13 Jul

Getting a Roadworthy Certificate (RWC) is essential when selling, transferring ownership, or re-registering a vehicle in Queensland. However, many vehicles fail their first inspection due to issues that could have been identified and repaired beforehand.

The good news is that most roadworthy failures are completely preventable with a little preparation. Here’s a look at the most common reasons vehicles fail a roadworthy inspection and how you can avoid them.


1. Tyres below the legal tread depth


Why it fails

Tyres are one of the most common reasons for roadworthy failures. Queensland regulations require a minimum tread depth of 1.5 mm, and tyres must be free from significant damage, bulges, and uneven wear.

How to avoid it

  • Check tyre tread using a tread depth gauge or wear indicators.
  • Replace tyres that are worn, cracked, or unevenly worn.
  • Ensure all tyres are the correct size and suitable for your vehicle.

2. Faulty or dim headlights, brake lights, or indicators


Why it fails

All vehicle lights must operate correctly to meet roadworthy requirements. A single faulty headlight, brake light, or indicator can result in a failed inspection.


How to avoid it

  • Perform a complete light check before your inspection.
  • Replace blown globes as soon as possible.
  • Ensure headlights are correctly aligned.

3. Worn or damaged brake components


Why it fails

Your braking system must operate safely and efficiently. Worn brake pads, damaged brake discs, leaking brake fluid, or uneven braking performance can all result in a failed inspection.

How to avoid it

  • Listen for squealing, grinding, or unusual brake noises.
  • Have your brake pads and rotors inspected regularly.
  • Repair brake fluid leaks immediately.

4. Cracked or chipped windscreen


Why it fails

Damage within the driver’s field of vision can obstruct visibility and compromise safety. Even small chips may cause a vehicle to fail if they affect the driver’s view.

How to avoid it

  • Inspect the windscreen for chips or cracks.
  • Repair small chips before they spread.
  • Replace the windscreen if damage is located in a critical viewing area.

5. Suspension problems


Why it fails

Worn shock absorbers, bushes, ball joints, and suspension components can affect vehicle stability and handling, resulting in a failed inspection.

How to avoid it

  • Watch for excessive bouncing or unusual suspension noises.
  • Have your suspension inspected regularly.
  • Replace worn components promptly.

6. Oil and fluid leaks


Why it fails

Visible leaks from the engine, transmission, cooling system, or power steering can result in a failed roadworthy inspection because they present both safety and environmental concerns.

How to avoid it

  • Check underneath your vehicle for fluid leaks.
  • Repair leaks before booking your inspection.
  • Include leak inspections during routine servicing.

7. Non-compliant vehicle modifications


Why it fails

Modifications that do not comply with Queensland regulations, such as illegal suspension lifts, incorrect lighting, or excessively dark window tint, may prevent your vehicle from passing inspection.

How to avoid it

  • Ensure all modifications comply with Queensland regulations.
  • Have aftermarket modifications inspected by a qualified technician.
  • Remove or rectify any non-compliant modifications before your inspection.

8. Steering problems


Why it fails

Loose steering components, worn tie rods, or excessive steering play can affect vehicle control and lead to a failed inspection.

How to avoid it

  • Pay attention to steering that feels loose or unusually stiff.
  • Have your wheel alignment checked if the vehicle pulls to one side.
  • Repair worn steering components promptly.

9. Rust or structural damage


Why it fails

Structural rust can weaken important areas of the vehicle, including suspension mounting points and chassis components, making the vehicle unsafe.

How to avoid it

  • Inspect the vehicle for rust underneath and around the wheel arches.
  • Treat minor rust before it spreads.
  • Repair structural corrosion before your inspection.

10. Seatbelts not operating correctly


Why it fails

Seatbelts must retract properly, lock securely, and be free from fraying or damage. Faulty seatbelts are an automatic roadworthy failure.

How to avoid it

  • Check every seatbelt for smooth operation.
  • Replace worn or damaged seatbelts.
  • Ensure all buckles lock securely.

How to ensure you pass your roadworthy inspection in Brendale

Preparing your vehicle before the inspection greatly improves your chances of passing the first time.

We recommend:

  • Booking a pre-roadworthy inspection.
  • Repairing minor issues before your official inspection.
  • Keeping your vehicle regularly serviced.
  • Choosing a trusted local workshop such as Nug’s Auto Haus Brendale for honest advice and professional inspections.

Final thoughts

Most roadworthy inspection failures are caused by simple maintenance issues that can be prevented with regular servicing and early repairs. By preparing your vehicle in advance and having it inspected by the experienced team at Nug’s Auto Haus Brendale, you can save time, avoid unnecessary stress, and improve your chances of passing your roadworthy inspection on the first attempt.

Categories: Uncategorized

Leave a Comment